For all of our gas stations on the $99 Professional Plan, we can assist with setting up and enabling the Tank Level Sensor for the SuperSonic Cloud back office.
TLS = Tank Level Sensor AKA ATG = Automatic Tank Gauge
There are two kinds of TLS integrations:
Direct - Our system communicates directly with the TLS/ATG.
Indirect/Proxied - Our system pulls the data indirectly through the POS system.
If the site has a Veeder-Root TLS/ATG and wants direct:
Ensure the site had a Veeder-Root on a minimum of Software revision 15 or later (21 or later preferred) - if not you will need a Veeder-Root tech to come and upgrade the Veeder-Root software
Install a TCP/IP card on the Veeder-Root. SuperSonic both sells and installs these TCP/IP cards. Please contact us for pricing if necessary.
Contact our support and let us know the new IP address so we can begin pulling.
If the site had a non-Veeder-Root TLS/ATG, then you MUST do Indirect/Proxied. This is done by:
Adding a Serial Card to the TLS/ATG (may already be there)
Running a Serial cable over RJ45 to the POS system.
Configuring the POS system to pull from the TLS/ATG.
After the above, let support know, and we can tell our system to begin pulling the data from the POS.